Battery Interconnects Cable

All of our Battery interconnect cables are fitted with terminal lugs.  Make sure to check your battery posts to ensure they can accept this type of connection.

To select the proper length of cable, put the battery bank in place and measure the distance between the battery terminals you need to connect.

Choose a length that is slightly longer than the measured value.

Avoid selecting an interconnect cable that is too long, since this may cause you to bend the cable significantly in order to get in in place.

Tight bends can cause wear or cracks in the insulation or damage the conductors and should be avoided. If necessary to bend the cable, use only slight bends.

Our high quality battery interconnect cables are the best value available featuring xtra-flex, multi-stranded copper cable - rated 105°C degrees, 750 volt, (UL) type MTW/THW, CSA -TEW.  All cables are assembled with large, tin-plated copper lugs, double crimped and heat sealed with color coded melt wall tubing, ensuring long life.

We offers several specialty wiring components to help complete your system.  Battery Interconnects and Battery to Invertor cables will be necessary for any system with batteries.  We also offer crimping Cable & Wire Tools if you would like to make your own battery cables.  In addition to wiring between solar modules, between batteries, and between the battery bank and inverter, you will also need wiring from the combiner box to the battery bank - sometimes known as the home-run. 

 

 

  • Item #: BIC6mmsq2C

Battery Interconnects Cable

Price: RM12.00
* Marked fields are required.
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review